Laboratórium

Chamber Furnaces with Brick Insulation or Fiber Insulation

Chamber furnace LH 216/12SW with scale to measure weight reduction during annealing Chamber furnace LH 15/12 with brick insulation

Cooling fan in combination with motor-driven exhaust air flap to reduce cooling time

Chamber furnace LH 30/14

Chamber furnace LH 30/12 with manual lift door

The chamber furnaces LH 15/12 - LF 120/14 have been trusted for many years as professional chamber furnaces for the laboratory. These furnaces are available with either a robust insulation of light refractory bricks (LH models) or with a combination insulation of refractory bricks in the corners and low heat storage, quickly cooling fiber material (LF models). With a wide variety of optional equipment, these chamber furnaces can be optimally adapted to your processes.

  • Tmax 1200 °C, 1300 °C, or 1400 °C
  • Dual shell housing with rear ventilation, provides for low shell temperatures
  • Five-sided heating for very good temperature uniformity
  • Heating elements on support tubes ensure free heat radiation and a long service life
  • Controller mounted on furnace door and removable for comfortable operation
  • Protection of bottom heating and flat stacking surface provided by embedded SiC plate in the floor
  • LH models: multi-layered, fiber-free insulation of light refractory bricks and special backup insulation
  • LF models: high-quality non-classified fiber insulation with corner bricks for shorter heating and cooling times
  • Door with brick-on-brick seal, hand fitted
  • Short heating times due to high installed power
  • Self-supporting arch for high stability and greatest possible protection against dust
  • Quick lock on door
  • Motor driven exhaust air flap
  • Freely adjustable air slide intake in furnace floor
  • Base included
  • Defined application within the constraints of the operating instructions
  • NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive

Additional equipment

  • Parallel swinging door, pivots away from operator, for opening when hot
  • Lift door with electro-mechanic linear drive
  • Separate wall-mounting or floor standing cabinet for switchgear
  • Cooling fan for shorter cycle times
  • Protective gas connection to purge with non-flammable protective or reaction gases
  • Manual or automatic gas supply system
  • Scale to measure weight reduction during annealing
  • Process control and documentation via VCD software package or Nabertherm Control Center (NCC) for monitoring, documentation and control
ModelTmaxInner dimensions in mmVolumeOuter dimensions in mmConnectedElectricalWeight
 °Cwdhin lWDHload kWconnection*in kg
LH 15/1212002502502501568086012305.03-phase1170
LH 30/1212003203203203071093012907.03-phase1200
LH 60/12120040040040060790108013708.03-phase300
LH 120/1212005005005001208901180147012.03-phase410
LH 216/1212006006006002169901280159020.03-phase450
            
LH 15/1313002502502501568086012307.03-phase1170
LH 30/1313003203203203071093012908.03-phase1200
LH 60/131300400400400607901080137011.03-phase300
LH 120/1313005005005001208901180147015.03-phase410
LH 216/1313006006006002169901280159022.03-phase460
            
LH 15/1414002502502501568086012308.03-phase1170
LH 30/14140032032032030710930129010.03-phase1200
LH 60/141400400400400607901080137012.03-phase300
LH 120/1414005005005001208901180147018.03-phase410
LH 216/1414006006006002169901280159026.03-phase470
            
LF 15/1313002502502501568086012307.03-phase1150
LF 30/1313003203203203071093012908.03-phase1180
LF 60/131300400400400607901080137011.03-phase270
LF 120/1313005005005001208901180147015.03-phase370
            
LF 15/1414002502502501568086012308.03-phase1150
LF 30/14140032032032030710930129010.03-phase1180
LF 60/141400400400400607901080137012.03-phase270
LF 120/1414005005005001208901180147018.03-phase370
1Heating only between two phases *Please see page 60 for more information about supply voltage